Connecting the camera to a printer, E30) – Nikon S4200 User Manual
Page 138
Refere
E
30
Connecting the Camera to a Printer (Direct Print)
Connecting the Camera to a Printer
1
Turn off the camera.
2
Turn on the printer.
• Check printer settings.
3
Connect the camera to the printer using the included USB cable.
• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle,
and do not use force when connecting or disconnecting the plugs.
4
The camera is automatically turned on.
• When properly connected, the PictBridge startup
screen (
1) will be displayed in the camera monitor,
followed by the image selection screen (
2).
B
If the PictBridge Startup Screen Is not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (
E78) in
the camera’s setup menu to Off, then connect the camera again.
4 / 4
15 / 05 / 2012
1
2