Troubleshooting, Display, settings and power supply – Nikon S4200 User Manual
Page 206
F
6
Tech
ni
cal
Not
e
s an
d
Index
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Display, Settings and Power Supply
Problem
Cause/Solution
A
Battery inserted in the
camera cannot be
charged.
• Confirm all plugs.
• Off is selected for Charge by computer in the
setup menu.
• When charging by connecting the camera to a
computer, battery charging stops when the
camera is turned off.
• When charging by connecting the camera to a
computer, battery charging stops if the
computer is suspended (sleeping), and the
camera may turn off.
• Depending upon computer specifications,
settings, and status, charging the battery
inserted in the camera may not be possible via
computer connection.
–
Camera cannot be
turned on.
• Battery is exhausted.
• The camera cannot be turned on while
connected to an electrical outlet via the
Charging AC Adapter.
Camera turns off
without warning.
• Battery is exhausted.
• The camera automatically turns off to save
power if no operations are performed for an
extended period of time
• The camera and battery may not work properly
at low temperatures.
• The camera turns off if the Charging AC Adapter
is connected while the camera is on.
• The camera turns off if the USB cable connecting
it to a computer or printer is disconnected.
Reconnect the USB cable.
• The internal temperature of the camera is high.
Leave the camera off until it has cooled and then
turn it on again.
–