Nikon S4200 - Manual (Page 73)

55
Basic Shooting Settings
Sh
oot
in
g
F
e
a
tures
Using the Flash (Flash Modes)
Flash mode can be selected to suit the shooting conditions.
1
Tap the flash mode icon.
2
Tap the desired flash mode icon.
• See “Available Flash Modes” (A56) for more
information.
• Tap the flash mode setting icon to return to the
previous screen.
• If you tap any other icon, the setting screen for that
item is displayed.
3
Frame the subject and take a picture.
• The flash lamp indicates flash status when the shutter-
release button is pressed halfway.
- On: The flash will fire when you press the shutter-
release button all the way down.
- Flashing: The flash is charging. The camera cannot
take pictures.
- Off: The flash will not fire when a picture is taken.
• If the battery is low, the monitor will be turned off while the flash is changing.
C
Effective Range of the Flash
When ISO sensitivity is set to Auto, the flash has a range of 0.5–4.5 m (1 ft 8 in.–14 ft) at the
maximum wide-angle zoom position and a range of 0.5–2.4 m (1 ft 8 in.–7 ft 10 in.) at the maximum
telephoto zoom position.
0 0 88
50 50 50
Flash mode
Auto