Nikon S4200 - Manual (Page 151)

E 43
The Shooting Menu (for A (Auto) Mode)
Refere
nce S
e
ct
io
n
C Continuous
Enable continuous shooting or BSS (Best Shot Selector).
B
Notes About Continuous Shooting
• When Continuous, BSS, or Multi-shot 16 is selected, the flash is disabled. Focus, exposure, and
white balance are fixed at the values determined with the first image in each series.
• The frame rate with continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• There are functions with which this setting cannot be enabled (A66).
B
Note About BSS
BSS is effective when taking pictures of still subjects. BSS may not produce the desired results if the
subject moves or the composition changes while the shutter-release button is held down.
B
Note About Multi-shot 16
Smear ( F3) visible in the monitor when shooting with Multi-shot 16 enabled will be recorded
with images. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when
shooting with Multi-shot 16 enabled is recommended.
On the A (auto) mode shooting screen M Tap the d tab M C Continuous
Option Description
U Single
(default setting) One picture is taken each time the shutter-release button is
pressed.
V Continuous
While the shutter-release button is held down, up to 6 pictures are
taken at a rate of about 1.3 frames per second (at an Image mode
setting of P 4608×3456).
D BSS
(Best Shot Selector)
The “Best Shot Selector” is recommended when shooting with the
flash off or the camera zoomed in, or in other situations in which
inadvertent motion can result in blurred images. When BSS is on,
the camera takes up to 10 pictures while the shutter-release
button is held down. The sharpest image in the series is
automatically selected and saved.
W Multi-shot 16
Each time the shutter-release button is
pressed, the camera takes 16 shots at a rate
of about 30 fps and arranges them in a
single image.
• Image mode is fixed at L (2560 × 1920).
• Digital zoom is not available.