Nikon S4200 - Manual (Page 183)

E 75
The Setup Menu
Refere
nce S
e
ct
io
n
k Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (
A23) to save power.
In this option, set the time allowed to elapse before the camera enters standby
mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected.
C
When the Monitor Turns off for the Power Saving Function
• Power-on lamp flashes in standby mode.
• Camera turns off after approximately three minutes passes in standby mode.
• To reactivate the monitor while the power on lamp is flashing, press any of the following buttons:
- The power switch, shutter-release button, A button, or b (e movie-record) button
C
Auto Off Settings
• The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
- When a setting screen, mode selection menu, or the setup menu is displayed: three minutes
- During slide show playback: up to 30 minutes
- When the AC adapter EH-62G is connected: 30 minutes
• The camera does not enter standby mode when transferring images using an Eye-Fi card.
Tap the d tab M Tap z (Setup menu) M k Auto off