Nikon D5100 User Manual

Page 122

Advertising
background image

x

104

A

Automatic Scene Selection (Scene Auto Selector)

If live view is selected in

i or j mode, the camera will automatically

analyze the subject and select the appropriate shooting mode when
autofocus is enabled. The selected mode is shown in the monitor.

c

Portrait

Human portrait subjects

d

Landscape

Landscapes and cityscapes

e

Close up

Subjects close to the camera

f

Night portrait

Portrait subjects framed against a dark
background

Z

Auto

Subjects suited to

i or j mode or that do not

fall into the categories listed above

b

Auto (flash off)

A

Flicker

You may notice flicker or banding in the monitor during live view or when shooting movies
under certain types of lighting, such as fluorescent or mercury-vapor lamps. Flicker and
banding can be reduced by choosing a Flicker reduction option that matches the
frequency of the local AC power supply (

0 170).

A

Exposure

Depending on the scene, exposure may differ from that which would be obtained when live
view is not used. Metering in live view is adjusted to suit the live view display, producing
photographs with exposure close to what is seen in the monitor. In P, S, A, and

% modes,

exposure can be adjusted by ±5 EV in increments of

1

/

3

EV (

0 70). Note that the effects of

values over +3 EV or under –3 EV can not be previewed in the monitor.

A

HDMI

When the camera is attached to an HDMI video device, the
camera monitor will turn off and the video device will display
the view through the lens as shown at right. If the device
supports HDMI-CEC, select Off for the HDMI > Device control
option in the setup menu (

0 148) before shooting in live view.

Advertising