Nikon D5100 - Manual (Page 62)

44
z
Focus Lock
Focus lock can be used to change the composition after focusing in AF-A, AF-S, and
AF-C
focus modes ( 0 39), making it possible to focus on a subject that will not be in a
focus point in the final composition. If the camera is unable to focus using autofocus
(
0 40), you can also focus on another subject at the same distance and then use
focus lock to recompose the photograph. Focus lock is most effective when an
option other than
e (Auto-area AF) is selected for AF-area mode (0 42).
1
Focus.
Position the subject in the selected focus point
and press the shutter-release button halfway to
initiate focus. Check that the in-focus indicator
(
I) appears in the viewfinder.
2
Lock focus.
AF-A and AF-C focus modes : With the shutter-release
button pressed halfway (q), press the AE-L/AF-L
button (w) to lock both focus and exposure (an
AE-L icon will be displayed in the viewfinder;
0 69). Focus will remain locked while the AE-L/AF-
L
button is pressed, even if you later remove your
finger from the shutter-release button.
AF-S focus mode : Focus locks automatically when
the in-focus indicator appears, and remains
locked until you remove your finger from the
shutter-release button. Focus can also be locked
by pressing the AE-L/AF-L button (see above).
3
Recompose the photograph and shoot.
Focus will remain locked between shots if you
keep the shutter-release button pressed halfway
(AF-S) or keep the AE-L/AF-L button pressed,
allowing several photographs in succession to
be taken at the same focus setting.
Do not change the distance between the camera and the subject while focus lock is
in effect. If the subject moves, focus again at the new distance.
A
The AE-L/AF-L Button
Custom Setting f2 (Assign AE-L/AF-L button; 0 166) controls the behavior of the AE-L/AF-L
button.
Shutter-release button
AE-L/AF-L button