A: autofocus, A1: af-c priority selection, A2: built-in af-assist illuminator – Nikon D5100 User Manual

Page 176

Advertising
background image

158

L

When AF-C is selected for viewfinder photography (

0 39), this option controls

whether photographs can be taken whenever the shutter-release button is pressed
(release priority) or only when the camera is in focus (focus priority).

Choose whether the built-in AF-assist illuminator lights to assist
the focus operation when lighting is poor.

a: Autofocus

a1: AF-C Priority Selection

G button

➜ A Custom Settings menu

Option

Description

G Release

Photos can be taken whenever the shutter-release button is pressed.

F Focus

Photos can only be taken once the camera has focused.

a2: Built-in AF-assist Illuminator

G button

➜ A Custom Settings menu

Option

Description

On

The AF-assist illuminator lights when lighting is poor. AF-assist illumination is only
available when both of the following conditions are met:
1. AF-S is selected for focus mode (

0 39) or single-servo autofocus is selected

when the viewfinder is used in AF-A mode.

2.

e (Auto-area AF) is chosen for AF-area mode (0 42), or an option other than
e is chosen and the center focus point is selected.

Off

The AF-assist illuminator does not light to assist the focus operation. The camera
may not be able to focus using autofocus when lighting is poor.

A

See Also

See page 41 for information on using the AF-assist illuminator. Information on the shooting
modes in which AF-assist is available may be found on page 216. See page 201 for
restrictions on the lenses that can be used with AF assist.

Advertising