Nikon D5100 - Manual (Page 138)

120
%
❚❚3 Selective Color
1
Select live view.
Rotate the live view switch to raise the mirror and display
the view through the lens in the monitor.
2
Display options.
Press J to display selective color options.
3
Select a color.
Frame an object in the white square in the center
of the display and press
1 to choose the color of
the object as one that will remain in the final
image (the camera may have difficulty detecting
unsaturated colors; choose a saturated color). To
zoom in on the center of the display for more
precise color selection, press
X. Press W to zoom out.
4
Choose the color range.
Press 1 or 3 to increase or decrease the range of
similar hues that will be included in the final
image. Choose from values between 1 and 7;
note that higher values may include hues from
other colors.
5
Select additional colors.
To select additional colors, rotate the command
dial to highlight another of the three color boxes
at the top of the display and repeat Steps 3 and 4
to select another color. Repeat for a third color if
desired. To deselect the highlighted color, press
O, or press and hold O to remove all colors.
Live view switch
Selected color
Color range