HID HDPii Plus User Guide 2.0 - Manual (Page 39)

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
December 2012 Page 39 of 103
© 2012 HID Global Corporation. All rights reserved.
3.9.3 Using Print Both Sides - Print Back Image on Front of Card
This option becomes active when Print Both Sides is checked. The Default is active and
unchecked.
Step Procedure
1 Select this option:
• If needing to print the first page of a two-page document
on the backside of the card.
OR
• If needing to print the resin black on the chip-side of the
Smartcard.
The second page of the document is printed on the front side of
the card.
3.9.4 Using the Dual Sided - Print Back Side Only option
Use this option to print only onto the backside of cards. (Note: The Print Back Side Only
checkbox default is active and unchecked.)
Step Procedure
1 Select Print Back Side Only to print only onto the backside of
preprinted cards that must have their Magnetic Stripe or smart
card chip encoded. ( Note: Load the cards in the usual
fashion.)
• When selecting this option, the Print Both Sides option
is automatically disabled.)
• When attempting to print a two-page document (if Print
Back Side Only is selected), the first page of the
document prints on the backside of the card.
• The second page of the document is then printed on the
back of a second card.
3.9.5 Using the Options Group
Figure 6 - Options