HID HDPii Plus User Guide 2.0 - Manual (Page 93)

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
December 2012 Page 93 of 103
© 2012 HID Global Corporation. All rights reserved.
Step Procedure
7 Printer prints the fluorescent BMP IMAGE at the ~I position on
the card.
Printer prints the fluorescent TEXT at the ~T position on the
card.
Card as Printed
8 Set the ribbon for YMCFK in the Printing Preferences.
( Note: The Auto Detect button may also be used.)
9 Check Dual Pass if you would like to print the F panel on a
separate panel of InTM Film from the YMC image. ( Note: Use
the default Dual Pass option if the fluorescent image is used in
places where other dye is used or any time the Invert F panel
Image option is selected.)
10 Check Invert F-Panel Image to create a negative of the
fluorescent image. ( Note: This may improve the look of the
person’s image if used for the Logo.)