6 selecting the undefined area(s), 7 defining the area to activate the card grid – HID HDPii Plus User Guide 2.0 User Manual
Page 61
HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
December 2012
Page 61 of 103
© 2012 HID Global Corporation. All rights reserved.
3.14.6 Selecting the Undefined Area(s)
Step
Procedure
1
Select the
Undefined Area(s) option to print the resin black (K) Panel for all black found only in the
space outside the areas defined, as shown below.
•
The card image becomes black with the grid and one area (available for the User to start with).
•
The defined area does not print black with resin.
3.14.7 Defining the Area to activate the Card Grid
Step
Procedure
1
Select on the appropriate
Defined Area (see below) to activate the card grid in the upper half of the
window.
•
It is through this card grid that up to five areas can be defined, as shown below.
•
When the card grid is first activated, then a small black square will appear at its default size of .2
x .2 (5mm x 5mm) and at its default location in the lower left-hand corner (0,0). (
Note: This
square represents the first defined area.)
3.14.8 Selecting the Print YMC under the K and Print K Only options
Step
Procedure
1
Use the
Defined Area function.
a. Define another area by clicking on the
Defined Area. (Note: Another .2 x .2 (5mm x 5mm)
area will appear in the lower left-hand corner. This is the location in which all newly defined
areas will first appear. Up to 5 areas can be defined.)
b. Delete an area by selecting the area and clicking on the
Delete button. (Note: If all areas are
deleted, the K Panel Resin options will automatically be deselected.)
2
Select the
Print YMC Under K option to print all black in the designated Defined/Undefined areas with
the Yellow (Y), Magenta (M) and Cyan (C) Ribbon Panels directly beneath the resin black (K) Panel.
(
Note: Select this option if printing resin black text or barcodes onto a colored background to provide a
more gradual transition between the two.)
OR
Select the
Print K Only option to print all black in the designated Defined/Undefined areas only with
the resin black (K) Panel or to print resin black onto a white background to maximize the sharpness of
printed text and barcodes.