Karcher Installation de potabilisation d’eau WPC 2500 SW - Manual (Page 15)

English 15
Î Check whether the mains plug of the
dosing pumps of the dosing stations is
connected to the sockets of the plant.
Î Check the position of the operating
swtich:
"Automatic“ position: the plant is con-
trolled by an external floater switch in
the drinking water tank.
"Manual" position: the plant is manu-
ally switched on and off using the
main switch.
Î Turn the main switch to position "1";
drinking water production will start.
– Display time
Alternating display of:
–
Acceptance / standby
– Drinking water index value
– Drinking water temperature
ṇ
Warning
Risk of damage. If the plant is to be shut
down for more than 14 days, then Kärcher
Customer Service must carry out some pre-
servative tasks.
Î Turn main switch to "0"; the plant will
stop production of drinking water.
Note
Do not switch off the plant overnight! The
media filter is automatically cleaned during
the night. There is a risk of damage to the
plant if you do not do this cleaning.
ƽ
Danger
Health hazard on account of poor quality of
drinking water. The control tasks outlined in
this maintenance plan are to be carried out
according to the schedule in order to ensure
the quality of drinking water. If the devia-
tions in the target values cannot be correct-
ed by taking the prescribed measures, then
stop production of drinking water and in-
form Kärcher Customer Service immediate-
ly.
Operation
Switching on the plant
Monitoring elements
Display media and active carbon filters
Display of the operating panel
Switching off the plant
Maintenance and care