Karcher Installation de potabilisation d’eau WPC 2500 SW - Manual (Page 20)

20 English
Operations log WPC
(A) Startup date with transfer log
Plant type: 1.024- Plant number:
Startup date: Installation site:
Type of raw water source: Customer:
Operating hours display [h] Raw water hardness [°dH]
Flow rate of raw water [µS/cm] pH value fo raw water [pH]
Raw water temperature [°C]
Media filter of inlet pressure during plant running
[MPa] Media filter of inlet pressure during return rinsing [MPa]
Active carbon filter of inlet pressure during plant run-
ning [MPa] Active carbon filter of inlet pressure during return rins-
ing [MPa]
Inlet pressure of fine filter [MPa] Outlet pressure of fine filter [MPa]
Concentrate pressure [MPa]
Membrane input pressure [MPa]
Drinking water quantity [l/h] Concentrate quantity [l/h]
Yield [%] Drinking water flow rate [µS/cm]
Dosing pump flocking stroke/ frequency [%] Dosing pump pre-chlorination stroke/ frequency [%]
Dosing pump anti-scalant stroke/ frequency [%] Dosing pump post-chlorination stroke/ frequency [%]
Remarks
Confirmation: The plant was started up and handed over in a fully functioning condition. It has been explicitly brought to the notice
of the customer that the watre produced by the plant must be checked according to the local standards by an approved testing agen-
cy before releasing it as drinking water. Further, it has also been brought to the notice of the customer that the operations log is to
be maintained; the customer has also been informed about the risks involved in handling chemicals and the hazards on account of
interchanging the chemicals.
Place, Date, Signature (Customer) Place, Date, Signature (Kärcher Service)