Sony SU-PW3M - Manual (Page 14)

14
(GB)
When connecting the
external equipment to
the TV after installation
1
Tilt the TV upward.
1 Unplug the mains lead.
2 Unfasten the two securing screws at the
bottom of the Mounting Rack which were
secured in step 4 of procedure 4 on page 12.
3 Hold the bottom left and right of the TV and
gradually lift it upward.
Notes
• Do not hold the transparent part of the TV.
• Do not let go of the TV while lifting it, otherwise
the TV may hit the wall and cause damage.
4 Confirm the two support braces of the Plate
Unit are locked into the bottom left and right
hooks on either side of the Mounting Rack.
5 Insert the screws removed in step 2 into the
screw holes on the outer sides of the bottom
left and right hooks of the Mounting Rack
and tighten firmly to lock the support braces.
To Customers, Sony Dealers
2
3
4
5
Screw hole for fixing
the support braces
Support
braces
When removing the TV
1
Unplug the mains lead from the
wall socket.
2
Remove all four securing screws
secured in step 4 of procedure
4 on page 12.
3
Be sure that two or more
persons hold the TV and slide it
upward to remove the TV.
WARNING
• Be sure that two or more persons hold the TV
when carrying it.
• Be careful not to allow the leads and cables to
get hung up when removing the TV.
• Be careful not to hurt your hands or fingers
when removing the TV.
Note
Always hold the TV by the non-transparent parts at
the top and bottom of the TV when carrying it.
To Sony Dealers