Sony VPL-PX1 - Manual (Page 18)

18
(GB)
To turn off the power
1
Press the I / 1 key on the Remote Commander or
on the control panel.
The following message appears to confirm if you
want to turn off the power.
P OW E R O F F ?
P l e a s e
p r e s s k e y a g a i n . I / u
Note
The message will disappear if you press any key
except the
I / 1 key, or if you do not press any
key for five seconds.
2
Press the I / 1 key on the Remote Commander or
on the control panel again.
The ON/STANDBY indicator flashes in green and
the fan continues to run for about 90 seconds to
reduce the internal heat. Also, the ON/STANDBY
indicator flashes quickly for the first 30 seconds.
During this time, you will not be able to turn the
power back on with the
I / 1 key.
3
Unplug the AC power cord from the wall outlet
after the fan stops running and the ON/STANDBY
indicator lights in red.
When you cannot confirm the on-screen
message
When you cannot confirm the on-screen message in a
certain condition, you can turn off the power by
holding the
I / 1 key on the Remote Commander or
on the control panel for about one second.
Note
Do not unplug the AC power cord while the
fan is still running; otherwise, the fan will
stop although the internal heat is still high,
leading to breakdown of the projector.
Projecting