Sony MCS1 - Manual (Page 24)

24 GB
MCS1(WW)_2-320-924-01(1)
1
Press the POWER button for more than two seconds.
The MSC1 starts. Perform the following procedure before inserting a
CD-R or connecting any type of media to the MCS1.
2
Press the ENTER button for more than two seconds.
3
Using the T and t buttons, select “VERIFY”.
By default, the verification setting is QUICK. The QUICK setting
starts data integrity verification after the copy is complete, allowing the
copy to be completed faster than with the VERIFY setting.
4
Press the ENTER button.
The “V” mark appears at the top of the display window, indicating that
data is automatically verified when copy ends.
z
Hint
You can cancel the verification by pressing the MODE button.