Sony RHT-S10 User Manual
Page 50
50
US
SAT Coaxial
Impedance: 75 ohms
Optical
Outputs (Analog)
Subwoofer
Pin jack
Voltage: 0.775 V RMS
Impedance: 1 kohm
HDMI section
Connector
HDMI 19pin-standard
connector
Video inputs/outputs
SAT, BD/DVD:
640 × 480p@60 Hz
720 × [email protected]/60 Hz
1440 × [email protected]/60 Hz
(pixel sent 2 times)
1280 × [email protected]/60 Hz
1920 × [email protected]/
60 Hz
1920 × [email protected]/
60 Hz
720 × 576p@50 Hz
1440 × 576p@50 Hz
(pixel sent 2 times)
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz
Audio inputs
SAT, BD/DVD INPUT:
Linear PCM 7.1ch/
Dolby Digital/ DTS
Tuner section
System
PLL quartz-locked digital
synthesizer
FM tuner section
Tuning range
87.5 – 108.0 MHz
(100 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Speakers
Front
Speaker units
50 mm (2 inches) cone type
× 2
Center
Speaker unit
50 mm (2 inches) cone type
Surround
Speaker unit
50 mm (2 inches) cone type
× 2
Subwoofer
Speaker unit
100 mm (4 inches) cone
type × 2
General
Power requirements
AC 120 V/60 Hz
Power consumption
On: 85 Watts
Control for HDMI is on:
1.5 Watts or more
Standby (Control for
HDMI is off):
0.3 Watts
Power output
(DIGITAL MEDIA PORT)DC OUT: 5 V, 700 mA
Dimensions (approx.)
1,134 Ч 138.5 Ч 172 mm
(44
3
/
4
Ч 5
1
/
2
Ч 6
7
/
8
inches)
(w/h/d) incl. projecting
parts
Mass (approx.)
12.4 kg (27 lb 6 oz)
Supplied accessories
Optical cable (1 m)
(39
3
/
8
inches) (1)
Remote commander (RM-
ANP009) (1)
Size AA (R6) batteries (2)
FM wire antenna (aerial)
(1)
Operating Instructions (1)
Design and specifications are subject to change without
notice.
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not
used in the printed wiring boards.
• Over 85 % power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.
• Halogenated flame retardants are not used in cabinets.