Self-diagnosis display/warning indicators, Self-diagnosis display/ warning indicators – Sony DEV-5 User Manual

Page 78

Advertising
background image



Table of C

on

ten

ts

M

enu Lists

Inde
x

GB

Self-diagnosis display/

Warning indicators

If indicators appear on the screen, check the

following.

If the problem persists even after you

have tried to fix a couple of times, contact

your Sony dealer or local authorized Sony

service facility. In this case, when you

contact them, give them all the numbers of

the error code beginning with C or E.

C:(or E:) : (Self-diagnosis display)

C:04:



The battery pack is not an “InfoLITHIUM”

battery pack (V series). Use an

“InfoLITHIUM” battery pack (V series)

(p. 88).

Connect the DC plug of the AC Adaptor to the

DC IN jack of this product securely (p. 11).

C:06:



The battery pack temperature is high. Change

the battery pack or place it in a cool place.

C:13:

 / C:32:

Remove the power source. Reconnect it and

operate this product again.

E:

:

Follow the steps from  on page 72.

 (Battery level warning)

The battery pack is nearly used up.

Depending on the operating environment or

battery conditions,  may flash, even if there

are about 20 minutes remaining.

(Warning indicator pertaining to

battery pack temperature)

The battery pack temperature is high. Change

the battery pack or place it in a cool place.


(Warning indicator pertaining to

HDMI output stopped by overheating)

Because the temperature of this product

has reached a level where HDMI output

has stopped, no image is displayed on the

connected monitor, etc. Leave this product

until the temperature decreases. However, you

can continue recording on this product.

(Warning indicator pertaining to

memory card)

Slow flashing

Free spaces for recording images are running

out. For the type of memory card you can use

with this product, see page 18.

Fast flashing

There are not enough free spaces for recording

images. After storing the images on other

media (p. 43), delete unnecessary images, or

format the memory card (p. 65).

The image database file may be damaged.

Check the database file by selecting

(MENU)  [Setup]  [ (

Media

Settings)]  [Repair Img. DB F.].

(Warning indicator pertaining to

memory card formatting)

The memory card is damaged.

The memory card is not formatted correctly

(p. 65).

(Warning indicator pertaining to

incompatible memory card)

Incompatible memory card is inserted (p. 18).

 (Warning indicator pertaining to

the write-protect of the memory card)

The memory card is write-protected.

Access to the memory card was restricted on

another device.



Advertising
This manual is related to the following products: