Sony PCG-XG700 - Manual (Page 103)

Connecting External Speakers
103
Connecting External Speakers
You can enhance the sound quality of your computer by connecting external speakers.
To connect external speakers
❑ Use the headphones symbol to locate the Headphone connector. Plug the
speaker cable into this connector.
To Press Result
Switch to an
external display Fn+F7 Toggles among the LCD, the external display
connected to the Monitor connector, and both the LCD
and external display.
✍
Check that your speakers are designed for computer use.
Shut down the computer and all peripheral devices before connecting the cables.
Connect all the cables before plugging in the power cord.
Turn on the peripheral devices’ power, then turn on your computer.
Turn down the volume of the speakers before you turn them on.
Do not place diskettes on the speakers as the speakers’ magnetic field may damage
the data on the diskettes.
Connecting Speakers
Only LCD LCD and external display
Only external display
Speakers
Speaker cable
(supplied with speakers) To
Headphone