Sony PCG-XG700 - Manual (Page 91)

Using the Mini Docking Station
91
1 With the VAIO logo facing up, plug the cable firmly into the connector and
both of the alignment posts in the guide holes.
2 With the VAIO logo facing up, plug the FDD into the other end until it locks
in place.
✍
If your notebook is in power saving mode, switch to normal mode before connecting a
floppy disk drive to the Mini Docking Station.
FDD Connecting
✍
When you connect the floppy disk drive to the floppy disk drive connector of the Mini
Docking Station, you cannot use the PRINTER connector of the floppy disk drive
cable. The printer can be connected to the printer port on the Mini Docking Station.
Floppy disk drive cable (supplied)
Floppy disk drive (supplied)
Mini Docking Station
1 2
Alignment posts
left side (supplied)