Sony PCG-XG700 - Manual (Page 79)

Using Power Saving Modes
79
To activate System Suspend mode
Press Fn+Esc, or press the power button and release it immediately. You can also
use the Power Management utility or the Jog Dial control to enter System
Suspend mode.
To return to normal mode
Press any key or the Power button for less than 4 seconds.
System Hibernation Mode
The state of the system is saved on the hard drive and power is turned off. The
power indicator light is off in this mode.
To activate System Hibernation mode
To activate System Hibernation mode, press the key combination Fn+F12.
To return to normal mode
Turn on the computer by pressing the power button. The computer returns to its
previous state.
❑ Time to return to normal mode
System Idle requires less time than System Suspend, and System Suspend
requires less time than System Hibernation.
❑ Power consumption
System Idle uses more power than System Suspend, and System Suspend
uses more power than System Hibernation.
✍
(Windows 2000) The “Save to Disk Manager” screen appears, and then the computer
enters System Hibernation mode.
✍
Do not move the notebook until its power indicator light turns off.
✍
When returning from System Hibernation mode, the system status stored on the hard
disk is erased and the computer starts normally if you press the power button and
hold for more than four seconds.