Sony SS-GN800 - Manual (Page 17)

MHC-GN800 4-244-569-13 (3)
Tape
17 GB
Recording to a tape
–– CD Synchro Recording/Recording Manually/Program Edit
You can record from a CD, tape, radio or other connected components. The recording level is
adjusted automatically.
Recording from a CD
(CD Synchro Recording)
Recording Manually
Insert a recordable tape into deck B.
Press CD. Press a function button for the recording source.
Load the CD you want to
record. Load the CD or tape (or other audio sources),
or tune to the station you want to record.
Press CD SYNC. Press REC PAUSE/START.
DECK B stands by for recording.
REC PAUSE/START indicator flashes.
Press DIRECTION repeatedly to select “g” to record on one side.
Select “j” (or RELAY) to record on both sides.
Press REC PAUSE/START. If you are recording manually, press hH to start
playing the source (for CD or Tape).
Recording starts.
Tips
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• For recording from the reverse side:
After step 1, press TAPE A/B to select deck B and
press hH twice to start playback of the reverse
side. Press x at the point where you want to start
recording. The TAPE B reverse side indicator lights
up.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
• For recording from a CD to a tape manually:
You can press > or . to select tracks during
recording pause mode (after step 4 and before step
6).
Press x to stop recording.
Steps
1
2
3
4
5
6
7
• You can mix the sound from the component
connected to the GAME INPUT jacks with another
function such as CD, tape, radio or MD connected
to this system. To record the mixed sound, press
GAME MIXING after step 4 of “Recording
Manually” and then press REC PAUSE/START to
start recording. Game Mixing does not function
during CD Synchro Recording.
Note
You cannot listen to other sources while recording.
continued