Sony SS-GN800 - Manual (Page 29)

MHC-GN800 4-244-569-13 (3)
Optional Components
29 GB
Recording on a connected
component Listening to audio from a
connected component
To
Listen to a
connected MD deck
Listen to a
connected VCR
Listen to the sound
of a connected
video game player
Notes
• If you press MD (VIDEO) while the power is off,
the power turns on automatically and MD (VIDEO)
is selected as the function.
• If the sound is distorted or too loud when VIDEO
function is selected, or you want to switch back to
MD function, repeat step 2 of “Listen to a
connected VCR”.
• If you press GAME while the power is off, the
power turns on automatically and GAME is selected
as a function. The equalizer switches to GAME EQ
and the previously selected effect is restored.
Do This
1 Connect the audio cords.
See “Hooking up optional
components” on page 28.
2 Press MD (VIDEO).
Start playing the connected
MD deck.
1 Connect the audio cords.
See “Hooking up optional
components” on page 28.
2 Hold down MD (VIDEO)
and press @/1 while the
power is on. Release @/1
first, then release MD
(VIDEO). This switches the
function from MD to
VIDEO. Start playing the
connected VCR.
1 Press GAME.
2 Select the preset effect.
See “Selecting the preset
effect” on page 21.
To
Make a digital
recording from CD
onto a connected
MD deck
Tip
When you remove the optical cover, keep it for future
use.
Do This
1 Connect the optional optical
cable. See “Hooking up
optional components” on
page 28.
2 Start recording.
Refer to operating
instructions provided with
the connected MD deck.
Connecting external
antennas
Connect an external antenna to improve the
reception.
FM antenna
Connect an optional FM external antenna. You
can also use the TV antenna instead.
FM75 Ω
COAXIAL – AM
AM antenna
Connect a 6 to 15 meter (20 to 50 feet)
insulated wire to the AM antenna terminal.
Leave the supplied AM loop antenna
connected.
FM75 Ω
COAXIAL –AM
Insulated wire
(not supplied)