Sony SS-GN800 - Manual (Page 34)

MHC-GN800 4-244-569-13 (3)
34 GB
Specifications
AUDIO POWER SPECIFICATIONS
(MHC-GX8800 USA model only)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6-ohm loads, both channels driven, from
120 Hz – 10 kHz; rates 200 watts per channel
minimum RMS power, with no more than 10% total
harmonic distortion from 250 miliwatts to rated
output.
Amplifier section
MHC-GX8800
Total harmonic distortion
Less than 0.1%
(6 ohms at 1 kHz, 100 W)
MHC-GN900
The following are measured at AC 127V, 60 Hz
(Mexican model only)
The following are measured at AC 120, 220, 240V
50/60 Hz (except Mexican model)
DIN power output (rated) 205 + 205 watts
(4 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
195 + 195 watts
(4 ohms at 1 kHz, 0.6%
THD)
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding etc.
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
Make sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
MHC-GN800 (HCD-GN800)
The following are measured at AC 127V, 60 Hz
(Mexican model only)
The following are measured at AC 120, 220, 240V
50/60 Hz (except Mexican model)
DIN power output (rated) 170 + 170 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
220 + 220 watts
(6 ohms at 1 kHz, 10%
THD)
MHC-GN800 (SS-WG800)
The following are measured at AC 127V, 60 Hz
(Mexican model only)
The following are measured at AC 120, 220, 240V
50/60 Hz (except Mexican model)
Continuous RMS power output (reference)
180 watts
(8 ohms at 100 Hz, 10%
THD)
MHC-GN700
The following are measured at AC 127V, 60 Hz
(Mexican model only)
The following are measured at AC 120, 220, 240V
50/60 Hz (except Mexican model)
DIN power output (rated) 160 + 160 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
200 + 200 watts
(6 ohms at 1 kHz, 10%
THD)
MHC-GN600
The following are measured at AC 127V, 60 Hz
(Mexican model only)
The following are measured at AC 120, 220, 240V
50/60 Hz (except Mexican model)
DIN power output (rated) 130 + 130 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
165 + 165 watts
(6 ohms at 1 kHz,
10% THD)
Inputs
GAME (VIDEO):
1 Vp-p, 75 ohms
(phono jack)
GAME (AUDIO):
Voltage 250 mV,
(phono jacks) impedance 47 kilohms
MD/VIDEO (AUDIO) IN: voltage 450 mV/250 mV,
(phono jacks)
impedance 47 kilohms
MIC: sensitivity 1 mV,
(phone jack) impedance 10 kilohms
Outputs
VIDEO OUT:
max. output level 1 Vp-p,
(phono jacks) unbalanced, Sync.
negative load impedance
75 ohms
PHONES: accepts headphones of
(stereo mini jack) 8 ohms or more
FRONT SPEAKER: accepts impedance of 6 to
16 ohms
SURROUND SPEAKER: accepts impedance of
(MHC-GN800/GN700/
24 ohms or more
GX8800 only)
SUBWOOFER:
accept impedance of
(MHC-GN800 only) 8 ohms or more
Precautions (continued)