Sony XAV-701HD - Manual (Page 43)

43
Audio streaming
Listening to a Bluetooth device via
this unit
If the other device supports A2DP (Advanced
Audio Distribution Profile), you can listen to the
playback sound via this unit.
1
Connect this unit and the Bluetooth
device (page 38).
2
Reduce the volume on this unit.
3
Press (HOME), then touch “BT Audio.”
The Bluetooth Audio display appears.
4
Operate the other Bluetooth device to
start playback.
5
Adjust the volume on this unit.
Note
During disconnection to the last-connected device,
touch “Reconnect” to search for the last-connected
Bluetooth device.
If the problem is not solved, touch “BT Settings,” then
set the signal to “ON.” Touch “Pairing >” to enter the
Paring mode.
For details on the procedure of the Paring, see
page 38.
Operating a Bluetooth device with
this unit
If the other device supports AVRCP (Audio
Video Remote Control Profile), you can control
playback via this unit.
Operations can be performed in the same way as
disc playback (page 20), except for the
following:
Notes
• The available operation differs depending on the
Bluetooth device. Perform unavailable operations on
the Bluetooth device.
• Depending on the Bluetooth device, it may be
necessary to touch u twice to start/pause the
playback.
• During audio streaming, some indications such as
track name, etc., may not appear on this unit.
General Settings about
Bluetooth
The Bluetooth settings can be configured in
“General Settings.”
1
Touch , and move the scrollbar up
and down.
The Bluetooth setting menu appears.
2
Touch the desired item in the list and
configure the setting.
The items in the Bluetooth setting menu are as
follows:
* Cannot be configured during a handsfree call.
Note
For details on the setting of other Bluetooth devices,
refer to their respective manuals.
Do this To
Touch reduce the volume level
differences between this
unit and the other Bluetooth
device. The level is
adjustable in single steps,
between –8 and +18.
“Bluetooth Connection”*
Activates the Bluetooth signal: “ON,” “OFF.”
Touch “Pairing >” to enter the Paring mode.
“Bluetooth Initialize”*
Initializes all Bluetooth-related settings. Touch
“Initialize” to confirm.
“Bluetooth Initialize” deletes all Bluetooth-
related settings such as phonebook data, call
history, preset dial, history of connected
Bluetooth devices, etc.