Sony PCV-LX920 User Manual
Page 106
1.
Click Start in the Windows taskbar, and select Control Panel.
2.
Click Network and Internet Connections, and select Network Connections.
3.
Right-click on the Local Area Connection with the device name, "WAN Network Driver," select Disable.
Open your AOL connection and verify that the application functions properly with the WAN Network Driver disabled. If you
need to restore this Network setting, repeat these steps (1 - 3) and select Enable.
Topic: How do I change the parallel port type to ECP, EPP, or bi- directional?
You can change the parallel port type using the System Setup utility (CMOS Setup Utility). To access System Setup:
1.
Click Start in the Windows
®
taskbar, and select Turn Off Computer. Select Restart.
2.
When the Sony screen displays, press the F2 key on your keyboard.
3.
Select the Advanced tab from the Setup Utility screen.
4.
Select "I/O Device Configuration" and press Enter.
5.
Use the arrow keys to highlight Parallel Port Mode and press Enter.
Note:
You can toggle between the Normal (bi-directional), EPP, ECP, and ECP+EPP options using the directional arrow
keys.
6.
Select the desired setting displays, and press Enter.
7.
Press the F10 key to Save and Exit.
Topic: The cursor on m y Sony Pen Tablet display does not m ov e or m ov es in an unpredictable m anner when I use
the VAIO
®
pen.
You may need to configure your VAIO pen's switch function. See
Configuring the VAIO Pen Functions
calibrating your pen to the pen tablet display.
Topic: Why doesn't m y m ouse resum e operation as m y input dev ice when I stop using the VAIO pen?
A conflict occurs between the pen and another input device while the pen is in contact with the Sony Pen Tablet display
screen. When you are finished using your VAIO pen, do not leave it on the tablet screen. Place the pen in the supplied pen
stand when it is not in use.
Topic: I cannot draw or erase on the Sony Pen Tablet display with m y VAIO pen.
This may occur when you move to different applications or windows where the Sony Tablet Set Up program is not loaded.
The application or window will return to its normal state when the pen tip is removed from the tablet screen.
Topic: My VAIO Pen does not respond correctly when m y com puter returns to Norm al m ode from Stand by or
Suspend m odes.
When the VAIO Pen is left too close to the tablet and your system is returning from Stand by or Suspend modes, your VAIO
Pen or Sony Pen Tablet settings may change. These symptoms and their solutions are listed as follows:
If the VAIO Pen does not move the cursor or the Rocker switch does not work, you must restart your computer.
Save all open documents and close all open applications with your mouse, before you restart your computer.
If the tablet mouse (UD cursor) appears to be the default setting in the Sony Tablet software, you can go to the
Sony Tablet Property window and select Edit-Reset Settings to cancel this registration.
Topic: My optical driv e tray does not open.
Use the Eject button
1.
Make sure the computer is turned on.
2.
Press the Eject button on the drive.
Use the My Computer icon
1.
Click Start in the Windows taskbar, then select My Computer.
2.
Right-click the appropriate optical drive icon.
3.
Select Eject from the shortcut menu.
Page 106