Sony PCV-LX920 - Manual (Page 51)

Attaching the stand to the system unit
1. Place the system unit upside down, with the front of the system facing towards you.
2. Insert the stand pegs into the ventilation holes of the system. Place the wider end of the stand at the rear of
the unit as shown.
3. Lock the stand onto the system unit by pressing down gently and pulling forward slightly. The stand clicks into
place.
Attaching the slim top stand
Note:
The stand keeps the system cool by allowing air to flow under it. It is important to place the system unit in an
upright position using the stand correctly, to avoid overheating of the system unit.
Page 51