Sony PCV-LX920 User Manual
Page 40
To adjust the pen's double-click speed and distance
1.
From the Sony Tablet Properties screen, click the Double-Click tab.
2.
To allow the Sony Tablet software to automatically adjust the double-click speed and distance, place a check
mark in the box located next to Double-Click Assist.
Double-Click Tab
Note:
You can disable the Double-Click Assist for specific applications. When Double-Click Assist is disabled, you can
only double-click by using the upper switch position. For more information about disabling the settings for specific
applications, see
Customizing the pen settings for specific software applications
3.
Automatically set both the double-click speed and distance by tapping twice on the (target icon) in the
"Automatic" area.
4.
You can manually change "Set Double-Click Distance" to a distance between 1-25 pixels by clicking on the
up/down arrows. You can also manually change "Set Double-Click Speed" by moving the measurement to a
desired speed.
5.
You may test your double-click speed and distance settings by tapping twice on in the Test area. If your tapping
matches the current double-click settings, the button icon changes ( ) to indicate a successful test. If the icon
does not change after several tests, review your double-click speed and distance settings.
6.
Click Apply. The new double-click speed and distance settings are applied to the pen.
Note:
You can reset your double-click speed and distance to the default settings by using the "Reset Tab to Default"
button. You can revert to previously saved double-click settings by using the "Revert Tab."
Page 40