Sony DCR-TRV25 - Manual (Page 107)

107
“
Memory Stick
”
Operations
Using a “Memory Stick” – Introduction
Selecting the still image quality mode
You can select the image quality mode in still image recording.
The default setting is FINE. (DCR-TRV18 only).
The default setting is SUPER FINE. (DCR-TRV25/TRV27 only).
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Press MENU, then select STILL SET in with the SEL/PUSH EXEC dial
(p. 179).
(3) Turn the SEL/PUSH EXEC dial to select QUALITY, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired image quality, then press
the dial.
1
3 4 2
LOCK
VCR
MEMORY
CAMERA
OFF(CHG)
POWER
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
RETURN
[MENU] : END
OFF
[MENU] : END
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
RETURN
SUPER FINE
FINE
STANDARD
REMAIN
5
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
RETURN
[MENU] : END
STANDARD
REMAIN
17
MENU