Sony DCR-TRV25 - Manual (Page 61)

61
Advanced Recording Operations
Normally, focus is automatically adjusted.
However, you can gain better results by manually adjusting the focus in the following
cases:
•The autofocus mode is not effective when shooting
– Subjects through glass coated with water droplets
– Horizontal stripes
– Subjects with little contrast with backgrounds such as walls and sky
•When you want to change the focus from a subject in the foreground to a subject in
the background
•Shooting a stationary subject when using a tripod
(1) Set the POWER switch to CAMERA or MEMORY (except DCR-TRV16), press
FOCUS/INFINITY lightly. The 9 (manual focus) indicator appears.
(2) Turn the focus ring to sharpen focus.
To return to the autofocus mode
Press FOCUS/INFINITY lightly to turn off the indicator.
To record distant subjects
When you press FOCUS/INFINITY down firmly, the lens focuses on the infinity and
indicator appears. When you release FOCUS/INFINITY, your camcorder returns to the
manual focus mode. Use this mode when your camcorder focuses on near objects even
though you are trying to shoot a distant object.
To focus precisely
It is easier to focus on subjects if you adjust the zoom to shoot at the “W” (wide-angle)
after focusing at the “T” (telephoto) position.
When you shoot close to the subject
Focus at the end of the “W” (wide-angle) position.
9 changes as follows:
when recording a distant subject.
when the subject is too close to focus on.
Focusing manually
2
1
FOCUS/INFINITY
Focus ring