Sony DCR-TRV25 - Manual (Page 145)

145
“
Memory Stick
”
Operations
– Except DCR-TRV16
You can enlarge still images recorded on a “Memory Stick.” You can select and view a
desired part from the enlarged still image. Also, you can copy the desired part of the
enlarged still image to tapes or “Memory Stick”s.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) In the memory playback mode, press PB ZOOM on your camcorder.
The center of the image is enlarged to about twice its size, and appear
on the screen.
(3) Turn the SEL/PUSH EXEC dial to move the enlarged image, then press the
dial.
R : The image moves downwards.
r : The image moves upwards.
(4) Turn the SEL/PUSH EXEC dial to move the enlarged image, then press the
dial.
t : The image moves leftward. (Turn the dial upwards.)
T : The image moves rightward. (Turn the dial downwards.)
(5) Adjust the zoom ratio by the power zoom lever.
You can enlarge the image from about 1.1 times up to five times its size.
W : Decreases the zoom ratio.
T : Increases the zoom ratio.
To cancel PB ZOOM mode
Press PB ZOOM.
Enlarging still images recorded on a
“Memory Stick” – Memory PB ZOOM
2
3
5
4
1
PB
ZOOM
LOCK
VCR
MEMORY
CAMERA
OFF(CHG)
POWER
PB ZOOM
[EXEC] : T t [EXEC] : r R
W
T
× 2.0
PB ZOOM
× 5.0
PB ZOOM
× 2.0
1/6
MEMORY PLAY
1/6
MEMORY PLAY
[EXEC] : T t