Sony DCR-TRV25 User Manual
Page 114
114
Recording images continuously
You can record still images continuously. Select one of the following modes in BURST
in the menu settings before recording.
NORMAL* [a]
Your camcorder shoots up to four still images in 1152
×
864 size or 13 still images in
640
×
480 size at about 0.5 sec intervals. (
)
EXP BRKTG (Exposure bracketing)*
Your camcorder automatically shoots three images at about 0.5 sec intervals at different
exposures. (
)
MULTI SCRN (Multi screen) [b]
Your camcorder shoots nine still images at about 0.4 sec intervals and displays the
images on a single page divided into nine boxes. Still images are recorded in 640
×
480
size. (
)
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Press MENU, then select STILL SET in
with the SEL/PUSH EXEC dial
(p. 179).
(3) Turn the SEL/PUSH EXEC dial to select BURST, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired setting, then press the
dial.
(5) Press MENU to make the menu setting disappear.
(6) Press PHOTO deeper.
* DCR-TRV25/TRV27 only
Recording still images on a “Memory Stick”
– Memory Photo recording
[a]
[b]