Sony DCR-TRV25 - Manual (Page 112)

112
– Except DCR-TRV16
You can record still images on “Memory Stick”s.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Keep pressing PHOTO lightly. The green z mark (AE/AF lock indicator)
stops flashing, then lights up. The brightness of the image and focus are
adjusted, being targeted for the middle of the image and are fixed. Recording
does not start yet.
(3) Press PHOTO deeper. The still image displayed after shutter sounds.
Recording is complete when the bar scroll indicator disappears. The image
when you pressed PHOTO deeper will be recorded on the “Memory Stick.”
You can record still images on “Memory Stick”s in the tape
recording or recording standby
For more information, see page 43.
Recording still images on a “Memory
Stick” – Memory Photo recording
3
2
1 / 12
1152
SFN
1152
PHOTO
PHOTO
1
LOCK
VCR
MEMORY
CAMERA
OFF(CHG)
POWER
SFN 50min
50min
[a][b]
[a]: Number of recorded images
[b]: Approximate number of images that can
be recorded on the “Memory Stick”