Sony DCM-M1 - Manual (Page 103)

103
Using with Other Equipment
Viewing on the computer display
Viewing the pictures
A browser software such as Internet Explorer or Netscape Navigator is required to view
the pictures on the computer.
(1) Turn on the computer.
(2) Insert the recorded MD DATA2 disc in the camcorder.
(3) Set the POWER switch to PLAY/EDIT.
(4) Touch
ADVANCED, then PC CONNECT.
(5) Touch CONNECT.
The homepage address appears on the camcorder’s screen.
(6) Operate the browser software on the computer and input the address
displayed in step 5.
The homepage with pictures recorded in the MD DATA2 disc appears on the
computer screen.
Note
Do not access the camcorder’s homepage from more than one computer at the same
time. Doing so may cause malfunction.
If the “Connect the network cable” message appears
Make connection as described in ”Step 2 Connecting the camcorder to the computer.”
Caution
Do not change the disc while the homepage is displayed. When you change the disc,
close the homepage first.
If the picture in the previous disc appears on the computer display after you have
changed the disc, check connection and press the RELOAD button of the browser.
If you do not have the recommended browser
You may be able to access by adding “/text.htm” at the end of the address (example:
http://192.168.0.10/text.htm).
Note on the browser software
Do not set the proxies. You may not be able to access your camcorder.
ADVANCED
RETURN
PC CONNECT
SET UP RESET
DISC FORMAT
CONNECT
SET UP
PC CONNECT
Assigned homepage address
http://192.168.0.10/
EXIT