Sony DCM-M1 - Manual (Page 48)

48
Comparing two pictures – 2-picture display
You can display the picture-in-picture image together with another image not only
from the same disc but also from other discs.
(1) Play back the track you want to compare with the picture-in-picture image.
(2) Touch the picture-in-picture screen.
The still picture in the picture-in-picture screen appears on the left. The still
picture in the currently playing track appears on the right.
To return to the picture-in-picture display, touch RETURN.
To compare with an image in other discs
After you have captured the picture-in-picture image, change the disc. Do not turn off
the power of the camcorder.
To operate the menu
You may use the control dial.
If PICTURE IN PICTURE is already set to ON
A previously selected scene appears in the picture-in-picture screen. The picture will be
replaced by a new scene when you touch CAPTURE.
You can select PICTURE IN PICTURE in the shortcut menu
To turn on the shortcut menu, press MENU during playback or playback pause.
The image in the picture-in-picture screen will disappear:
•when several minutes have passed after the POWER switch is set to OFF.
•when the power turned off automatically in the CAMERA or INTERVIEW mode.
•when the power source was disconnected.
Note on digital effect
Scene transition and picture effects are not applied to the picture-in-picture and 2-
picture images.
When displaying an audio track
No picture-in-picture screen is displayed.
Displaying two pictures – Picture-in-picture
b