Sony DCM-M1 - Manual (Page 37)

37
Advanced Recording Operations
If you record from audio equipment such as a CD player
Connect the audio equipment to the LINE IN jack of the connecting cord installed in
your camcorder using an audio connecting cable (not supplied).
Playback and erasing
You cannot play back or erase in the INTERVIEW mode.
If you are using headphones
The sound from headphones will be muted for a moment when you start and stop
recording. The sound recorded in the disc is not affected. (The situation is same for the
speaker output when audio equipment is connected to LINE IN.)
Playing the track recorded in the INTERVIEW mode
The audio track recorded in the INTERVIEW mode is displayed by the first photo with
the
icon on the index display.
Touch the track to start recording.
Playback screen of the track recorded in the INTERVIEW MODE
You will hear the audio. On the LCD screen are a large blank screen and small photos to
the right of the screen. When the recorded photo is reached during playback, the large
screen will be replaced by the photo.
When the interview recording was done like this,
Audio recording
Photo recording
it is played back like this.
Audio playback
Photo playback
(Picture in screen A)
When the recorded photo is reached during audio playback, screen A is replaced by
photo 1, 2 or 3.
Index image on the index display
The first recorded photo becomes the index image.
Note
Slow playback and frame-by-frame playback are not possible with an audio track.
A
1
2
3
If you touch the photos
on the side (1, 2, 3), the
audio goes the position
together with the photo.
If you touch the large
screen (A), the image is
enlarged. Touch
RETURN to return to
the interview play
display.
Recording audio including photo - Interview recording
1 2 3
1 2 3
Start
V Stop
None