Sony DCM-M1 - Manual (Page 60)

60
Checking the track information
Labelling the track
You can label a track using up to 100 characters.
(1) Touch the track name box on the track information display.
(2) Input characters (p. 80).
Note
You can record up to 100 characters in one track, and 5000 characters in one disc.
You cannot label the track if:
•the disc is protected.
•the track is protected (✔ is in the PROTECT box).
Marking a track
Mark the tracks which you want to distinguish from others. If you select “MARK” in
“SORT” in the PLAY menu, those marked tracks are displayed together at the top of the
index display.
(1) Touch the MARK box in the track information display to indicate ✔.
icon will be displayed on the marked tracks.
To cancel the mark setting
Touch the MARK box again to erase ✔.
You cannot mark the track if:
•the disc is protected.
•the track is protected (✔ is in the PROTECT box).
To mark using the Remote Commander
Select the desired track on the index display, then press MARK on the Remote
Commander.
To mark tracks during playback
(1) Press MARK on the Remote Commander while playing back the track.
The track is played back repeatedly and the confirmation message appears.
(2) Select YES using B/b, then press ENTER.
To cancel the mark setting
Press MARK again during playback.
12.24.1999 1:30 PM
0002 01:23
TRACK INFORMATION
MARK
PROTECT
8.00 Mbps DATA RATE
CLOSE