Sony KLV-23HR1 - Manual (Page 19)

19
Installing and Connecting the TV
Connecting a Digital TV Receiver
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box’s Y, P
B
and P
R
jacks to the Y, P
B
and P
R
jacks on the TV. Use
the VIDEO 3 IN connections.
Note
Component video (Y, P
B
, P
R
) connection is necessary to view 480p, 720p, and 1080i
formats. Note that this TV displays all format types of picture in a resolution of 1280 dots
× 768 lines.
2
Using an AUDIO cable, connect the Digital TV Set-top box’s AUDIO
OUT jacks to the TV’s AUDIO IN jacks.
Note
The Y, P
B
and P
R
jacks do not provide audio, so audio cables must be connected to
provide sound.
VHF/UHF R-AUDIO-L VIDEO S VIDEO
VIDEO 1 IN AUDIO OUT
R L DC IN 14.5V R-AUDIO-L
VIDEO 3 IN
Y P B P R
VMC-10HG (not supplied)
Digital TV Set-top box
RK-74A (not supplied)
Rear of TV
P
R
P
B
Y
AUDIO-R (red)
AUDIO-L (white)