Programming the remote control – Sony KLV-23HR1 User Manual

Page 31

Advertising
background image

31

Watching the TV

Operating Video
Equipment with Your TV
Remote Control

Programming the remote control

MUTING

POWER

VCR/DVD SAT/CABLE

VCR/DVD

SLEEP

JUMP

VOL

CH

ENTER

MTS/SAP

GUIDE

TV/SAT

SAT/CABLE

WIDE MODE DISPLAY

FUNCTION

TV

SYSTEM

OFF

FAVORITES

MENU

CODE SET

1

2

3

4

5

6

7

8

0

9

TV/VIDEO

PICTURE

MODE

POWER

SAVING

TV

2

3

4

1

5

The remote control is preset to operate Sony video
equipment.

Sony equipment

Beta, ED Beta VCRs

8mm VCR

VHS VCR

DV VCR

DVD player

If you have video equipment other than Sony video
equipment that you want to control with the TV’s
remote control, use the following procedures to
program the remote control.

Note

The equipment must have infrared (IR) remote capability in
order to be used with this remote control.

From the “Manufacturer’s codes” listed on page 32,
select the three-digit code number for the
manufacturer’s code of your equipment. If more than
one code number is listed, start with the number
listed first. Use the code number to complete the
following procedure.

1

Press CODE SET.

2

Press the function button you want to program.

To program a cable box or a satellite receiver
Press SAT/CABLE (FUNCTION).

To program video equipment
Press VCR/DVD (FUNCTION).

3

Enter the three-digit manufacturer’s code number
using the 0-9 buttons.

4

Press ENTER.

5

To check if the code number works, aim the
TV’s remote control at the equipment and press
the VCR/DVD and/or SAT/CABLE (POWER)
button that corresponds with that equipment. If it
responds, the programming is completed. If not,
try using the other codes listed for that
manufacturer.

Tips

• If more than one number is listed, try entering them one by

one until you come to the correct code for your equipment.

• If you enter a new code number, the code number you

previously entered at that setting is erased.

• In some rare cases, you may not be able to operate your

equipment with the Sony remote control. In this case, use the
equipment’s own remote control unit.

Programmable code number

303

302

301

348

751

(Continued)

Advertising