Sony NEX-VG10 - Manual (Page 18)

19 US
Ge
tti
ng s
ta
rte
d
Attaching the battery pack
Press the battery pack against the back of the
camcorder, and slide it up until it clicks.
Checking the remaining battery level
Check the level with the following indicators
displayed on the LCD monitor or viewfinder.
Note
• The displayed level may not be correct under certain
circumstances.
Removing the battery pack
Turn off the camcorder. While pressing the BATT
lever (1), remove the battery pack (2).
Using the wall outlet (wall socket)
as a power source
Connect the power cord (mains lead) to the AC
Adaptor, and connect the AC Adaptor to the
camcorder and the wall outlet (wall socket).
Align the v mark on the DC plug with that on the DC
IN jack.
Battery level
High
Low
“Battery exhausted” You cannot record
any more images.
BATT lever
Power cord (mains lead)
AC Adaptor
DC IN jack
DC plug
to the wall outlet
(wall socket)
Continued