Sony VGX-XL3 - Manual (Page 87)

84 VGX-XL3 Digital Living System
To return the BIOS to the original configuration, perform the following
steps.
1 Press the power button, and when the VAIO ® logo is displayed on the screen,
press the F2 key on the keyboard. The BIOS setup menu runs and the "BIOS
SETUP UTILITY" screen is displayed.
2 Press the F5 key. The message "Load Setup Defaults" displays.
3 Press the Left Arrow or Right Arrow key and select OK, then press the Enter
key. All the configuration items return to the original configuration.
4 Press the F10 key (Save and Exit). The message "Save configuration
changes and exit now?" is displayed.
5 Press the Left Arrow or Right Arrow key and select OK, then press the Enter
key. The changed configuration is saved, the BIOS setup menu ends and
Windows Vista starts.
Event:
How do I know if the battery level of the keyboard is sufficient?
Comment:
The level of the batteries in the keyboard can be checked using the battery
indicator located on the upper right portion of the keyboard.
Note: Turn off the power to the keyboard when you replace the batteries for
the keyboard.
Event:
Windows operation becomes unstable.
Comment:
Quit the software you are using and restart the VGX-XL3 computer.
If this device doesn't restart, turn the power off by holding the power button of
this device for at least six seconds. The power lamp turns off when the power
is off. If the power lamp does not turn off and blinks in orange (standby mode),
try to turn off the power again by holding the power button for at least sx
seconds. However, the file you are creating or editing may not be usable if
you turn off the power using this method.