Sony VGX-XL3 User Manual

Page 91

Advertising
background image

88

VGX-XL3 Digital Living System

2

Re-connect the keyboard/touchpad to the VGX-XL3 computer by pressing the
Connect buttons (on the back of the keyboard and the front panel of VGX-XL3
at the same time and hold for a few seconds.

Event:

Don't know how to enter text using the VAIO

®

Remote Control.

Comment:

Refer to the Media Center User Guide for Windows Vista™.

Event:

Cannot enter text when I press the keys on the keyboard.

Comment:

Make sure that the "Num Lock" indicator on the upper right keyboard is not
displayed.

Make sure the power switch is ON for the keyboard.

Check the battery level on the keyboard display.

Make sure you are within range of the computer (recommended under
15ft).

Event:

Cannot use the keyboard

Comment:

Reponse methods vary depending on the reason the keyboard is not able to
be used. Confirm the following and follow the procedures below.

Usage environment

The distance between this machine and the keyboard must be within about
10m. If metal is near the keyboard, communication card may be affected. It's
best to maintain a clear line of sight between the keyboard and computer for
maximum distance.

The keyboard operates at 2.4 GHz. If a wireless device which uses the same
2.4 GHz, such as a wireless LAN, is used nearby, it may not operate properly.

Power ON

Make sure the Power switch on the keyboard is turned on. When you are not
using the keyboard, turn off the power to preserve the batteries.

Advertising