Agilent Technologies Agilent 4396B - Manual (Page 42)

Step 2: Setting Up the Analyzer
In this step , you will set the following parameters:
A ctive channel Channel 2
Analyzer type Spectrum analyzer mode
Input S input
Frequency Range 0 Hz to 80 MHz
Setting the A ctive Channel
The analyzer has two measurement channels . This allows you to have
two di erent measurement setups . Other selections you make on the
front panel a ect only the active channel. T o set the active channel
to channel 2:
In the A CTIVE CHANNEL block, press
4 Chan 2 5 .
V erify the Chan 2 active channel indicator
lights .
Note All selected settings are stored separately for each channel. Y ou
must select an active channel (1 or 2) before you can change the
measurement setup for that channel.
2-4 Spectrum Analyzer T our