Agilent Technologies Agilent 4396B - Manual (Page 69)

4
Spectrum Measurement Examples
This chapter contains the following spectrum measurement examples:
Harmonic distortion measurement
Carrier/noise ratio (c/n) measurement
Tracking a drifting signal
Network measurement with spectrum monitor
Amplitude modulation (am) signal measurement
Frequency modulation (fm) signal measurement
Burst signal measurement
Basic Setup T o measure the spectrum of a test signal, use the S input as shown in
Figure 4-1.
Figure 4-1. Basic Connection for Spectrum Measurement
The spectrum of input signals can also be monitored at the A, B , and
R inputs . The use of the spectrum monitor function is described later
in this chapter .
Spectrum Measurement Examples 4-1