Agilent Technologies Agilent 4396B - Manual (Page 54)

Recalling the S A TOUR le .
Press 4 Recall 5 . The disk access lamp lights .
The stored le is listed in the softkey label
area. Press
FFFFFFFFFFFFFFFFFFFFF
SATOUR_S to recall the analyzer
settings that you saved.
Note Sux, \_S ," means the analyzer settings are saved. If you save the
analyzer settings in a DOS format, an extension, \.sta ," is appended
to the le name .
After the disk access lamp goes out, all analyzer settings that you set
are recalled. Y ou can verify them on the display . If you want to know
what settings are saved, see chapter 8 of the Function R eference
manual.
2-16 Spectrum Analyzer T our