Sony RCD-W500C - Manual (Page 23)

Recording/Editing
23
Notes
• You cannot pause recording in Synchro-Recording.
• If Repeat Play is selected, it is automatically
canceled.
• If Shuffle Play is selected, it is automatically
canceled.
• The following functions do not work while
Synchro-Recording:
– Silent Pause function
– Level Sync function
– Manual Track Making function
– Fade-in, Fade-out recording
– Recording level adjustment (the recording level is
set to the same as original disc)
• During Synchro-Recording, the Direct Recording
function is turned on regardless of the Setup Menu
setting.
• When copying a disc digitally recorded under
control of the Serial Copy Management System
(SCMS), the unit automatically select the analog
recording. High speed recording changes to normal
speed recording. For details on SCMS, see page 20.
• When copying a commercial music CD contains
copy protection code, the unit automatically select
the analog recording. High speed recording changes
to normal speed recording.
• SBM function is available only for analog
recordings (page 34).
• You cannot stop recording when finalizing in
Make-Disc Synchro-Recording.
x
H
DECK A/DECK B
CD SYNCHRO
HIGH
High-Speed Synchro-Recording
You can easily make digital recordings from a
CD to a CD-R or CD-RW, faster than normal
speed Synchro-Recording. You cannot monitor
the recorded signal while recording. To use
Make-Disc Synchro-Recording, set “Make
Disc” in the Setup Menu to “On” beforehand
(page 35).
When using the remote, set DECK A/DECK B
to DECK B.
1
Press POWER.
2
Press OPEN/CLOSE of DECK B and
place a recordable CD-R or CD-RW on
the disc tray. Press OPEN/CLOSE of
DECK B again to close the disc tray.
“TOC Reading” appears. The unit starts to
read the TOC (Table of Contents) data and
shows the type of the disc on the deck in the
display.
With the label side up
CD SYNCHRO HIGH x H
POWER OPEN/CLOSE
DISC 1-5 A (OPEN/CLOSE for RCD-W100)
continued