Sony RCD-W500C - Manual (Page 5)

5
Note on High-Speed
Synchro-Recording
When recording a CD, certain conditions
may cause the sound to dropout, noise in the
recording, or even unwanted tracks on the
CD-R or CD-RW. If this happens, clean the
CD as described in “On cleaning” above, and
record to the CD-R or CD-RW using normal
speed Synchro-Recording only.
Note on CD-R or CD-RW
playback
Playback of a CD-R or CD-RW recorded by
a CD-R or CD-RW recorder may not be
possible depending on the recording
conditions (e.g., dirty disc, etc.). Also,
please note that you need to finalize a CD-R
or CD-RW before playing it back on DECK
A of this unit or a system other than the one
used to make the recording. (Finalizing is a
process to complete the recording.)
After finalizing a CD-R, you can play it in
any conventional CD player. However,
depending on the state of the recording, the
sound may skip during playback.
After finalizing a CD-RW, you can play it in
a CD-RW compatible player only.
Music discs encoded with
copyright protection
technologies
This product is designed to playback discs
that conform to the Compact Disc (CD)
standard. Recently, various music discs
encoded with copyright protection
technologies are marketed by some record
companies. Please be aware that among those
discs, there are some that do not conform to
the CD standard and may not be playable by
this product.
Note on discs
With the following kinds of discs, you may
experience a reading failure or noise when recorded
to a CD-R or CD-RW.
– Discs with adhesive labels attached to them
– Irregularly shaped discs (for example, heart or star
shaped)
– Discs with heavy printing on only one section (may
effect the balance of the disc in the disc tray)
– Old discs
– Scratched discs
– Dirty discs
– Warped discs