Sony VGC-RA910G - Manual (Page 56)

VAIO Digital Studio Computer Quick Start
56
Connecting the Remote Sensor and Remote
Sensor Control
The remote sensor communicates with the Media Center remote control,
enabling you to change channels and to perform other functions. If you are using
a cable or satellite set-top box, you can connect the remote sensor control to the
remote sensor, which enables you to control the set-top box with the remote
control.
To connect the remote sensor
1 Connect the remote sensor unit to a USB port located on either the front or
back panel of your computer.
2 Place the remote sensor in a position that enables it to communicate with
your remote control.
Connecting the remote sensor (back panel)
FRONT
WOOFER
/CENTER REAR
Remote sensor
(supplied)