Connecting a stereo a/v dubbing cable, Connecting a tv monitor (display), Vaio digital studio computer quick start – Sony VGC-RA910G User Manual
Page 60
VAIO Digital Studio Computer Quick Start
60
Connecting a stereo A/V dubbing cable
1
Connect a stereo A/V dubbing cable with triple RCA plugs at each end
(optional) directly into the composite video port, composite audio L and R
jacks, located on either the front or back panel of your computer.
2
Connect the other ends of the stereo A/V dubbing cable into the appropriate
jacks on your compatible VCR or camcorder.
Connecting a TV monitor (display)
1
Connect the video connector end of the video cable adapter to the TV Out
(S-video/video) jack on the back panel of your computer.
2
Connect the jack end of the video cable adapter to either end of a video cable
(optional). Connect the other end of the video cable to the Video-In jack on
your TV monitor or display, located on either the side or back of your TV
monitor/display.
3
Connect the single-jack end of an audio cable (optional) to the Headphones
jack located on the front or back panel of your computer. Connect the
double-jack end of the audio cable to the Audio-In (L/R) on your TV
monitor or display. (The Audio-In jacks may be located on the side or rear of
your TV monitor/display.)
Connecting a TV monitor or display
✍
The video cable adapter is supplied with certain VAIO computer models. The video
cable adapter is not necessary, if you use an S-video cable to connect your TV to the
computer’s TV out (S-video/video) jack.
V
ID
E
O
IN
PU
T
V
ID
E
O
L(M
ON
O)
R
AUDIO
AUDIO
– VIDEO1 INPUT –
S VIDEO
COMPOSITE
FRONT
Audio cable
(optional)
Video cable
adapter
Video cable
(optional)